From the classic small rifle to the most equipped and sophisticated long-distance shooting rifle, each one is unique and deserves the best support. Choose the ideal spacer on which your RifleReady or RifleStand module (not included) will be mounted, and that's it.

Its magnetic mounting allows installation on any metal surface, or opt for screw mounting (kit available) on any other surface.

Don’t forget to choose the color that will match (or not) your module.

HOW TO CHOOSE THE RIGHT SPACER:

To choose your spacer, please refer to the following illustration and follow the instructions below.

1) Hold your rifle parallel to the wall on which you want to install your RifleReady or RifleStand

2) Make sure to leave at least 5mm room between the wall and the most prominent point of the weapon (scope turret for example).

3) Measure using a measuring tape the distance between the wall and the area of ​​the weapon that will rest against your RifleReady or RifleStand (for example L1 on the illustration in the gallery).

4) Choose your spacer. If the measured dimension is 96mm for example, choose the "S100" spacer. You will then have exactly 100mm between your wall and the bottom of your CMV module once in place.

CAUTION :

- Accurate and properly sized measurement of your offset is important.

- Do you own a first-generation RifleReady or RifleStand? Please let us know in the comments.

What's included :

- 1x spacer

Options to consider :

- MagLabel

- Index plate

- Fixation kit

Product dimensions (W x H): 75 x 75 mm